ABB TP867 3BSE043664R1控制器轧辊供应单元

产品标题：TP867 3BSE043664R1控制器轧辊供应单元ABB

质保：七天验收期，质保期一年
发货期：1-3个工作日

产品详情资料

IIPIC错误消息，请参见第3-187页的错误消息列表。IPIC-IndustryPack接口控制器3-187 3 IPIC错误消息下表列出了IPIC测试组错误消息：表3-12。写入0时，IPIC错误消息消息原因寄存器未清除，地址a，预期e，读取r读取数据不为零。寄存器访问错误，地址a，预期e，读取r读取的数据与写入的数据不同。中断控制寄存器未清除测试无法将0写入IPIC中断控制寄存器中的IL2-IL0（中断级别）位或IEN（中断启用）位。或当ICLR（中断清除）位被设置时INT（中断）未清除。E/L位未设置测试无法设置（写入一个）IPIC中断控制寄存器中的E/L*（边缘/电平敏感）位。中断启用位未设置测试无法设置IPIC中断控制寄存器中的IEN（中断启用）位。中断状态位未设置IPIC中断控制寄存器中的INT位未设置，这是切换PLTY（极性）的预期结果PIC Error Messages on page 3-187 for a list of the error messages. IPIC - IndustryPack Interface Controller 3-187 3 IPIC Error Messages The following table lists the IPIC test group error messages: Table 3-12. IPIC Error Messages Message Cause Register did not clear, address a, expected e, read r Read data is not zero, when zero was written. Register access error, address a, expected e, read r Read data differs from that written. Interrupt Control Register did not clear Test was unable to write zero to the IL2- IL0 (interrupt level) bits or the IEN (interrupt enable) bit in an IPIC Interrupt Control Register. Or INT (interrupt) did not clear when the ICLR (interrupt clear) bit was set. E/L bit did not set The test was unable to set (write one) the E/L* (edge/level sensitive) bit in an IPIC Interrupt Control Register. Interrupt Enable bit did not set The test was unable to set the IEN (interrupt enable) bit in an IPIC Interrupt Control Register. Interrupt Status bit did not set The INT bit in an IPIC Interrupt Control Register did not set as is the expected result of toggling the PLTY (polarity) 

主营产品简介
只卖库存产品;出完需订货!价格以客服说明为准!!订货货期以客服说明为准，有任何疑问请联繁客服! Limited stock, Contact US!

●使用前:

在操作和维护，安装设备之前，请阅读并严格遵守安全相关的信息。

Read and strictly follow safety-related information before operatingmaintainingand installing equipment.

●使用者要求:

必须从事安装，组装或维护设备等相关工控电气机械以及其他相关技术的人员。

Must be engaged in the installation,assembly or maintenance of equipment and other related industriacontroeectrica machinery and other related technica personne.应用范围:

应用于品牌本系列工业以及生产生活自动化设备产品。

Used in the brand of this series of industriaand production automation eauipment products

适用于场景:系统集成，非标定制，产线升级改造，原设备电气替换等等。

Suitable for scenarios:system integration,non-standard customizationproduction line upgrading and transformation,electrical replacement of original equipment,etc.

●操作人员:

应该由本品牌专业培训操作员来安装、操作和维修设备。专业人员具有技术能力强，熟悉安全信息和安全实施:

熟悉设备的安装加工、操作和维护:熟悉处理所有的潜在危险情况。

Equipment should be installed,operated and maintained by trained operators from the brand

●危险情况

警告

.请注意使用人员的人身安全。

●除了产品特性以及功能，还需了解产品的使用寿命环境。

●充分学习产品使用手册，否则非专业人员可能会造成人身危险。

Study the product instruction manual thoroughlyotherwise it may cause personal danger to non-professionals.

●服务行业

适用水泥，木业，石业，橡胶，石油，化工，发电，环保，水处理，制冷，交通，钢铁，食品，饮料，船舶，制冷等行业

Applicable to cementwood,stone,rubber,petroleumchemical, power generation,