GE DS200TCQBG1BBAB 全新到货模块卡件

产品详情资料

该位被锁存。一旦设置，必须通过向该位位置写入零来清除。Latched Sync Loss（锁存同步丢失）的断言通常表示接收器链路已断开或已断开，无论是有意还是无意，数据可能已丢失。如果连接到接收器的上游节点断电或禁用，也会发生此事件。位10:RX FIFO已满–当该位为高（1）时，RX FIFO已被满一次或多次。该位被锁存。一旦设置，必须通过向该位位置写入零来清除。这是一种故障情况，数据可能已丢失。Bit 09:RX FIFO几乎已满–当该位为高（1）时，RX FIFO已几乎已满一次或多次。该位被锁存。一旦设置，必须通过向该位位置写入零来清除。RX FIFO几乎满位的断言表明接收机电路以容量运行，在正常运行条件下，不应发生此事件。如果确实发生，PCI总线主控器应tempoINT4–当该位为高（1）时，已接收到一个或多个类型4网络中断。This bit is latched. Once set, it must be cleared by writing a zero to this bit location. The assertion of the Latched Sync Loss usually indicates the receiver link was or is disconnected, either intentionally or unintentionally, and data may have been lost. This event will also occur if the upstream node tied to the receiver is powered off or is disabled. Bit 10: RX FIFO Full – When this bit is high (1), the RX FIFO has been full one or more times. This bit is latched. Once set, it must be cleared by writing a zero to this bit location. This is a fault condition and data may have been lost. Bit 09: RX FIFO Almost Full – When this bit is high (1), the RX FIFO has been almost full one or more times. This bit is latched. Once set, it must be cleared by writing a zero to this bit location.The assertion of the RX FIFO Almost Full bit indicates the receiver circuit is operating at maximum capacity and, under normal operating conditions, this event should not occur. If it does occur, the PCI bus master should tempoINT4 – When this bit is high (1), one or more type 4 network interrupts have been received.

发货期：1-3个工作日，具体可联系客服
质保：质保期一年！

主营产品简介
专注于DCS、PLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

优势：供应进口原装正品，专业停产配件，

发货快，货期精准，

主营品牌包括 ABB贝利、GE/FUANC、FOXBORO、英维思TRICONEX 、本特利BENTLY、A-B罗克韦尔、艾默生EMERSON 、OVATION、MOTOROLA、XYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTH、KUKA、NI、DEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOG、PROSOFT等品牌。

只卖库存产品;出完需订货!价格以客服说明为准!!订货货期以客服说明为准，有任何疑问请联繁客服! Limited stock, Contact US!

●使用前:

在操作和维护，安装设备之前，请阅读并严格遵守安全相关的信息。

Read and strictly follow safety-related information before operatingmaintainingand installing equipment.

●使用者要求:

必须从事安装，组装或维护设备等相关工控电气机械以及其他相关技术的人员。

Must be engaged in the installation,assembly or maintenance of equipment and other related industriacontroeectrica machinery and other related technica personne.应用范围:

应用于品牌本系列工业以及生产生活自动化设备产品。

Used in the brand of this series of industriaand production automation eauipment products

适用于场景:系统集成，非标定制，产线升级改造，原设备电气替换等等。

Suitable for scenarios:system integration,non-standard customizationproduction line upgrading and transformation,electrical replacement of original equipment,etc.

●操作人员:

应该由本品牌专业培训操作员来安装、操作和维修设备。专业人员具有技术能力强，熟悉安全信息和安全实施:

熟悉设备的安装加工、操作和维护:熟悉处理所有的潜在危险情况。

Equipment should be installed,operated and maintained by trained operators from the brand

●危险情况

警告

.请注意使用人员的人身安全。

●除了产品特性以及功能，还需了解产品的使用寿命环境。

●充分学习产品使用手册，否则非专业人员可能会造成人身危险。

Study the product instruction manual thoroughlyotherwise it may cause personal danger to non-professionals.

●服务行业

适用水泥，木业，石业，橡胶，石油，化工，发电，环保，水处理，制冷，交通，钢铁，食品，饮料，船舶，制冷等行业

Applicable to cementwood,stone,rubber,petroleumchemical, power generation,