欢迎光临~瑞昌明盛自动化设备有限公司官方网站!
语言选择:繁體中文
您的位置:主页 > 产品中心 > GE模块 DS200TBQDG1ACC 现货 >

GE模块 DS200TBQDG1ACC 现货

  • GE模块 DS200TBQDG1ACC 现货
  • GE模块 DS200TBQDG1ACC 现货
  • GE模块 DS200TBQDG1ACC 现货
  • GE模块 DS200TBQDG1ACC 现货
  • GE模块 DS200TBQDG1ACC 现货
GE模块 DS200TBQDG1ACC 现货 GE模块 DS200TBQDG1ACC 现货 GE模块 DS200TBQDG1ACC 现货 GE模块 DS200TBQDG1ACC 现货 GE模块 DS200TBQDG1ACC 现货

GE模块 DS200TBQDG1ACC 现货

    产品型号: DS200TBQDG1ACC

    产品分类:ABB

    联系人:周一飞

    手机:18579229209

    邮箱:1849076084@qq.com

GE模块 DS200TBQDG1ACC 现货 GE模块 DS200TBQDG1ACC 现货 GE模块 DS200TBQDG1ACC 现货 GE模块 DS200TBQDG1ACC 现货 GE模块 DS200TBQDG1ACC 现货

产品详情资料

如果GO位已设置,但Universe II尚未启用为PCI主控器,PCI_CSR寄存器中有BM(总线主控器启用)位,或者如果DVA和DLA内容未彼此64位对齐,则传输不会开始,DGCS寄存器中的P_ERR位指示协议错误,如果启用,则生成中断。如果DMA由于某种原因(停止、停止或错误)而终止,则所有DMA寄存器都包含指示DMA终止位置的值。一旦清除了所有状态位,DMA可以通过简单地设置GO位从其停止的位置重新启动。只有清除了所有状态位,GO位才会生效。这些位包括STOP、HALT、DONE、LERR、VERR和P_ERR;全部在DGCS寄存器中。在设置GO位之前或设置GO位时,通过向这些位写入“1”来清除所有位。读取时,GO位始终返回零,与DMA的当前状态无关。清除钻头在任何时候都没有影响。DGCS寄存器中的ACT位指示DMA当前是否处于活动状态。一旦GO位被设置,它就由DMA设置,当DMA空闲时,它被清除。通常,当ACT位被清除时,DGCS寄存器中的其他状态位之一被设置(DONE、STOP、HALT、LERR、VERR或P_ERR),指示DMA不再活动的原因。If the GO bit is set, but the Universe II has not been enabled as a PCI master with the BM (bus master enable) bit in the PCI_CSR register, or if the DVA and DLA contents are not 64-bit aligned to each other, the transfer does not start, a protocol error is indicated by the P_ERR bit in the DGCS register and, if enabled, an interrupt is generated. If the DMA has been terminated for some reason (stopped, halted, or error), all DMA registers contain values indicating where the DMA terminated. Once all status bits have been cleared, the DMA may be restarted from where it left off by simply setting the GO bit. The GO bit will only have an effect if all status bits have been cleared. These bits include STOP, HALT, DONE, LERR, VERR, and P_ERR; all in the DGCS register. These bits are all cleared by writing “one” to them, either before or while setting the GO bit. The GO bit always returns a zero when read independent of the DMA’s current state. Clearing the bit has no impact at any time. The ACT bit in the DGCS register indicates whether the DMA is currently active. It is set by the DMA once the GO bit is set, and cleared when the DMA is idle. Generally, when the ACT bit is cleared, one of the other status bits in the DGCS register is set (DONE, STOP, HALT, LERR, VERR, or P_ERR), indicating why the DMA is no longer active. 

发货期:1-3个工作日,具体可联系客服
质保:质保期一年!

 

主营产品简介
专注于DCSPLC、机器人控制系统、大型伺服四大系统领域。

主营产品各种模块/卡件,控制器,触摸屏,伺服驱动器。

优势:供应进口原装正品,专业停产配件,

发货快,货期精准,

主营品牌包括 ABB贝利、GE/FUANCFOXBORO、英维思TRICONEX 、本特利BENTLYA-B罗克韦尔、艾默生EMERSON OVATIONMOTOROLAXYVOM、霍尼韦尔HONEYWELL 、力士乐REXROTHKUKANIDEIF、横河、伍德沃德WOODWARD、瑞恩、施耐德SCHNEIDER 、安川、 穆格MOOGPROSOFT等品牌

只卖库存产品;出完需订货!价格以客服说明为准!!订货货期以客服说明为准,有任何疑问请联繁客服! Limited stock, Contact US!

●使用前:

在操作和维护,安装设备之前,请阅读并严格遵守安全相关的信息。

Read and strictly follow safety-related information before operatingmaintainingand installing equipment.

●使用者要求:

必须从事安装,组装或维护设备等相关工控电气机械以及其他相关技术的人员。

Must be engaged in the installation,assembly or maintenance of equipment and other related industriacontroeectrica machinery and other related technica personne.应用范围:

应用于品牌本系列工业以及生产生活自动化设备产品。

Used in the brand of this series of industriaand production automation eauipment products

适用于场景:系统集成,非标定制,产线升级改造,原设备电气替换等等。

Suitable for scenarios:system integration,non-standard customizationproduction line upgrading and transformation,electrical replacement of original equipment,etc.

●操作人员:

应该由本品牌专业培训操作员来安装、操作和维修设备。专业人员具有技术能力强,熟悉安全信息和安全实施:

熟悉设备的安装加工、操作和维护:熟悉处理所有的潜在危险情况。

Equipment should be installed,operated and maintained by trained operators from the brand

●危险情况

警告

.请注意使用人员的人身安全。

●除了产品特性以及功能,还需了解产品的使用寿命环境。

●充分学习产品使用手册,否则非专业人员可能会造成人身危险。

Study the product instruction manual thoroughlyotherwise it may cause personal danger to non-professionals.

●服务行业

适用水泥,木业,石业,橡胶,石油,化工,发电,环保,水处理,制冷,交通,钢铁,食品,饮料,船舶,制冷等行业

Applicable to cementwood,stone,rubber,petroleumchemical, power generation,

 

产品类目

联系我们

联系人:周一飞

手机:18579229209

电话:18579229209

邮箱:1849076084@qq.com

地址: 江西省九江市瑞昌市东益路23号赛湖农商城401号

用手机扫描二维码关闭
二维码