产品详情资料此菜单中提供的一些命令是为
仅用于调试和系统测试，并可能导致网关停止与
从而导致潜在的数据丢失或其他通信故障。
只有当您完全了解这些命令的潜在影响，或者您明确
由ProSoft技术技术支持工程师指导。
可能有一些特殊的命令键未在菜单中列出，但可能会激活
其他诊断或调试功能。如果您需要这些功能，我们将建议您如何
通过技术支持使用它们。按键时请小心，以免
意外执行不需要的命令。如果状态数据寄存器参数设置为0和3900之间的任何值
PCB配置、网关状态数据将放置在网关的
数据库，从参数指定的寄存器开始。状态数据为
组织如下。Some of the commands available to you from this menu are designed for advanced
debugging and system testing only, and can cause the gateway to stop communicating with the
processor or with other devices, resulting in potential data loss or other communication failures.
Use these commands only if you fully understand their potential effects, or if you are specifically
directed to do so by ProSoft Technology Technical Support Engineers.
There may be some special command keys that are not listed on the menu but that may activate
additional diagnostic or debugging features. If you need these functions, you will be advised how to
use them by Technical Support. Please be careful when pressing keys so that you do not
accidentally execute an unwanted command. If the Status Data Register parameter is set to any value between 0 and 3900 in
the PCB configuration, gateway status data will be placed in the gateway's
database, starting at the register specified by the parameter. The status data is
organized as follows.
